Girbau Washing Machine Error Codes

1. Error Codes: ALM/A-*

Probable Cause

1. Faulty water inlet
   • Check water input pressure.
   • Check manual water inlet valves.
   • Check the status of electro valve
2. Defect in the electro valves
   • Call Service.
3. Defect in the level control system
   • Call Service.

2. Error Codes: ALM/E-*

Probable Cause

1. Machines with pump drain: obstruction of the draining pump
   • Check the status of the washing bath’s output hoses
   • Call Service
2. Anomaly in the drain system
   • Check the status of the washing bath’s output hoses.
3. Erroneous drain configuration
   • Call Service

3. Codes: ALM/HOT

Probable Cause

1. Inadequate stop of the washing machine with bath at high temperature
   • Close the door of the washing machine to allow opening of cold water valve. Press STOP key to drain the bath and access to the door opening. Repeat this operation until the alarm report disappears.
2. Excess of temperature with machine stopped.
   • If the alarm report does not disappear after five attempts, disconnect the general power supply and close water inlet manual valves.

• Anomaly in the heating system
  • Call Service

• 8 configurable programs.
• Up to 9 phases per program.
• Four water levels can be selected.
• Connection to an external dosing system.
• Failure check and alarm messages.
• Test program.
• Rinse Hold crease-guard mode stop (in the final phase only).
• Starting up at the desired time.
• Gradual cool-down (in the wash phase only).