You’ll need the ID Plate’s entire model number, which you can usually locate on the inside of the door frame or at the back of the machine, to get your carbon brushes for your washing machine.
If you are unable to locate the suitable motor carbon brushes for your washing machine, please contact us and we will assist you!
How To Reset Bosch Washing Machine
The reset technique appears to be similar for most Bosch washing machines, and it is carried out by following the steps below in order:
Identities This could include Balay, Bosch, Constructa, Crolls, DeDietrich, Hitachi, Koenic, Kuppersbusch, Lynx, Merker, Neff, Novamatic, Pitsos, Profilo, Schulthess, Siemens, Superser, Viva, and many others.
However, keep in mind that you should always address the problem before attempting the reset, as the error code indicates that something is wrong!
Then, as follows, clear the error code:
- Press and hold down the spin button while simultaneously turning the dial to the 7 o’clock position.
- Turn the program dial to the off or reset position (should be at the 12 o’clock position).
- Press and hold the spin button for about 5 seconds before releasing it.
- Press the off button on the dial.
- The error should be reset or cleared once the machine is turned back on.
If the same code appears again, there is a problem that has to be examined further. If you require additional assistance in diagnosing a problem with your washing machine, please use the comment below.
So when the washer breaks down, it seems like an endless nightmare. If your washing machine has displayed one of the following error codes: F04, F05, F21, F42, F43, or F44, the most likely cause is a faulty motor.
Fortunately, our video will show you various causes for this mistake and assist you in restoring the functioning of your washer before the laundry room begins to pile up.
Washing Machine Bosch Error Code F04
- Error in the motor (No tacho signal)
- The program has ended, but the motor has not started.
- The motor tries to start until it reaches the end of the program.
This error number indicates that there is a malfunction with the motor (which could be brushes), or that a motor winding is open circuit. Motors are expensive, so make sure you’re positive the one you have is defective before getting one.
Washing Machine Bosch Error Code F05
- High resistance connections (faulty carbons)
- Motor spins uncontrollably or motor plug is not connected
- Program aborted
When this error occurs, it is usually due to a problem with the motor carbon brushes.
Washing Machine Bosch Error Code F21
- Time out without motor action or
- Long Drain fault code, which usually indicates that there is a blockage in the drainage system. Something is usually trapped in the drain pump or the inlet line that runs from the wash tub to the pump.
Washing Machine Bosch Error Code F42
- Error in the motor
- Examine the motor connecting block.
- Double-check the wiring
- Inspect the carbon brushes in the motor.
- Double-check the tacho connection
- Inspect the motor.
Washing Machine Bosch Error Code F43
- Error in the motor
- Examine the motor connecting block.
- Double-check the wiring
- Check the carbon brushes in the motor;
- Check the tacho connections;
- Check the motor
Washing Machine Bosch Error Code F44
- Error in the motor
- Examine the motor connecting block.
- Double-check the wiring
- Inspect the carbon brushes in the motor.
- Double-check the tacho connections
- Inspect the motor.
Also Read Hisense Washing Machine Error Codes
