9 Type of Antenna Cable Port

Posted on
Antenna Cable Port – Everyone is familiar with the antenna cable . Although technically that is not its name, since its technical name is IEC 60169-2 and it is a coaxial cable terminated in the Belling-Lee connector. It is not the most reliable and can become deformed with use, so many reception quality problems are caused by a cable with poor contact.

The antenna cable is necessary to receive broadcasts from an old-fashioned television antenna or DTT. In other words, without it you don’t have a television. Or so it was, since now many operators offer IP television packages, which do not receive the signal by antenna but through their Internet connection.

Although very old and severely limited, the fact that not all households can have broadband Internet access will guarantee that this connector will remain in effect for many years.

In this post we are going to talk to you about the types of coaxial connectors that exist for this type of cable. An in-depth analysis of the options available for both baseband and broadband .

These two types of bands are the two main functions that these devices provide us.

Baseband Connectors

It is a series of connectors for thin coaxial cable. Each station is connected via a network card to a BNC T connector. This procedure is performed on both sides of the coaxial cable to close the circuit.

#1. IEC 169-2 Connector, The Coaxial TC Antenna Cable

Type of Antenna Cable Port

The IEC 169-2 connector is known as coaxial tv antenna cable and is the typical RF connector used in FM / DAB radio receivers and European televisions. It is a very old connector, although it is still used in consumer devices.

#2. F Connector

Type of Antenna Cable Port  - F conector

A radio frequency coaxial connector that is most commonly used with terrestrial aerial television, in addition to universal and cable television for satellite television. In the 70s it was when its use by VHF antenna television became so common and later also for UHF .

#3. BNC Coaxial Connector

Type of Antenna Cable Port  - BNC conector

It is a male connector that is installed at both ends of the cable and is used in ethernet and video network connections.

Broadband connectors

They are connectors made for cables with a higher shielding, which can cover higher speeds and longer runs. There are two kinds of coaxial cables that are used in this type of connectors, one is the 50-ohm cable that is normally used for digital transmission, and the other is the 75-ohm cable most used in analog transmission.

#1. XLR-3 connector

Type of Antenna Cable Port  - XLR3 conector

The name comes from the English acronym ” Xternal Live Return “, which means (Active External Return). Then it includes the 3 because it has 3 pins, since later the 4, 5, 6, 7 and 8-pin connectors began to be introduced.

This is the most used connector for professional audio and being apart from the standard connector used in equipment with great lighting to transmit the digital control signal “DMX”.

#2. RCA coaxial connectors

Type of Antenna Cable Port  - RCA conector

This is the most common connector in the audiovisual world, used for both non-professional video and normal audio connections.

It should be noted that this male connector has a pole in the center (+), which is surrounded by a small metal ring and an insulating plastic part.

#3. JACK connector

It is also known as a TRS or TRRS connector, being an audio connector , used mainly in analog devices.

Jack connectors range between various diameters:

The most used are the 6.35 mm and the miniaturized 3.5 mm and 2.5 mm. The most used are 3.5 mm ones, since they are used for portable devices, headphone output and mp3.

The 6.35mm is mostly used in musical instruments and the world of professional audio.

coaxial connectors buy sale professional audio sound jack
Coaxial jack connector

#4. UHF coaxial connectors

UHF coaxial connectors are used to work on VHF and HF frequencies. Later it was applied in amateur radios up to 150 MHz.

#5. Mini UHF connector

This is the small version of the UHF connector. Designed for use in mobile telephony and applications where size plays a fundamental role.

#6. FME connectors

Tiny connector that is used in installations and mobile applications. Provides great performance with 2.0 GHz DC power.

#7. SMA connector

A threaded coaxial connector used in microwaves, very useful up to 33 GHz frequencies. It should also be noted that it is no longer used after 18 GHz.

We hope that all this information on coaxial connectors has been of great help to you so that you know which connectors to choose and remember that you can buy yours at any of our points of sale. We will wait for you!