Aeg Washing Machine Error E40, E41

By Posted on

AEG WASHING MACHINE ERROR E40, E41 OR EMITS 4 BEEPS / 4 FLASHES

If error message E40 occurs or the washing machine beeps or blinks 4 times, there is a problem with the door lock. The door may not be closed properly.
Press this until you hear a click and restart the washing program. It’s also possible that laundry is stuck between the door. Is the drum very full? Another cause may be that something has to be removed.
In the most extreme case, the door lock is broken and a technician is required to replace it.

ISSUE

  • Aeg washing machine error message E40, E41,E42, E43, E44 & E45
  • Washing machine emits 4 beeps / 4 flashes

APPLIES TO

RESOLUTION

1. Check if the door/lid is properly closed.

If necessary, give the door/lid a firm push. You can hear a click.

2. Check whether any laundry is caught between the door seal and door glass.

If necessary, remove some laundry from the drum before restarting the cycle.

3. There is too much laundry in the machine (overload).

If necessary, remove some laundry from the drum before restarting the cycle.

4. Check the mechanical child safety lock (if applicable).

Disable the child safety lock using a coin or similar object and try again.

For detailed procedure refer to the user manual supplied with your appliance.

If the above steps don’t resolve the issue then a service visit by one of our approved service providers is recommended.

CAUSE

  • The appliance door/lid is open or not closed correctly
  • The appliance is overloaded
  • The door lock is faulty

Aeg Washing Machine Error E40, E41

Action To Take:

Aeg Washing Machine Error E40, E41

  1. Make sure the door is shut firmly.
  2. Inspect door lock wiring.
  3. Replace door lock.
  4. Replace main PCB.

Related posts: